Roland MIDI Implementation DP990F - Manual (Page 17)

17
5. Effect List
0100: Equalizer
0101: Spectrum
0102: Enhancer
0104: Isolator
0105: Low Boost
0106: High Pass Filter
0110: Overdrive
0111: Distortion
0112: Overdrive2
0113: Distortion2
0107: Speaker Simulator
0114: Amp Simulator (Guitar Amp Simulator)
0120: Phaser
0129: Multi Stage Phaser
012a: Infinite Phaser
0123: Stereo Flanger
0127: 3D Flanger
0128: 2Band Flanger
0121: Auto Wah
0103: Humanizer
012b: Ring Modulator
0125: Tremolo
0126: Auto Pan
012c: Slicer
0130: Compressor
0131: Limiter
0142: Stereo Chorus
0140: Hexa Chorus
0141: Tremolo Chorus
0143: Space D
0144: 3D Chorus
0145: 2Band Chorus
0122: Rotary
012d: Rotary2
0300: Rotary Multi
015b: Stereo Delay1
015c: Stereo Delay2
015d: Stereo Delay3
015e: Stereo Delay4
015f: Stereo Delay5
0150: Monaural Delay
0151: Modulation Delay
0152: Triple Tap Delay
0157: 3D Delay
0159: Tape Echo
015a: Reverse Delay
0172: Lo-Fi
0175: Telephone
0156: Gate Reverb
0200: OD->Chorus (Overdrive->Chorus)
0201: OD->Flanger (Overdrive->Flanger)
0202: Overdrive->Delay
0203: Dist.->Chorus (Distortion->Chorus)
0204: Dist.->Flanger (Distortion->Flanger)
0205: Dist.->Delay (Distortion->Delay)
0206: Enhancer->Cho (Enhancer->Chorus)
0207: Enhancer->Fl. (Enhancer->Flanger)
0208: Enhancer->Delay
0209: Chorus->Delay
020a: Flanger-> Delay
020b: Chorus-> Flanger
0040: Damper Resonance
■EFX Parameter Map
The parameters with”#1” or “#2” at the end of parameter name can be
controlled with each exclusive message”Part EFX CONTROL 1” and “Part EFX
CONTROL 2.”
● 0100: Equalizer
This is a four-band stereo equalizer (low, mid x 2, high).
No Parameter Value Description
1 Low Freq 0-1 200, 400 Hz Frequency of the low range
2 Low Gain #1 0-30 -15-+15 dB Gain of the low range
3 Mid1 Freq 0-16 200-8000 Hz Frequency of the middle range 1
4 Mid1 Gain 0-30 -15-+15 dB Gain of the middle range 1
5 Mid1 Q 0-4
0.5, 1.0,
2.0, 4.0, 8.0
Width of the middle range 1
Set a higher value for Q to narrow
the range to be affected.
6 Mid2 Freq 0-16 200-8000 Hz Frequency of the middle range 2
7 Mid2 Gain 0-30 -15-+15 dB Gain of the middle range 2
8 Mid2 Q 0-4
0.5, 1.0, 2.0,
4.0, 8.0
Width of the middle range 2
Set a higher value for Q to narrow
the range to be affected.
9 High Freq 0-2
2000, 4000,
8000 Hz
Frequency of the high range
10 High Gain #2 0-30 -15-+15 dB Gain of the high range
11 Level 0-127 0-127 Output Level
● 0101: Spectrum
This is a stereo spectrum. Spectrum is a type of filter which modifies the timbre
by boosting or cutting the level at specific frequencies.
No Parameter Value Description
1 Band1 (250Hz) 0-30
2 Band2 (500Hz) #1 0-30
3 Band3 (1000Hz) 0-30
4 Band4 (1250Hz) #2 0-30
5 Band5 (2000Hz) 0-30
6 Band6 (3150Hz) 0-30
7 Band7 (4000Hz) 0-30
8 Band8 (8000Hz) 0-30
-15-+15 dB Gain of each frequency band
9 Q 0-4
0.5, 1.0, 2.0,
4.0, 8.0
Simultaneously adjusts the width
of the adjusted ranges for all the
frequency bands.
10 Level 0-127 0-127 Output Level
● 0102: Enhancer
Controls the overtone structure of the high frequencies, adding sparkle and
tightness to the sound.
No Parameter Value Description
1 Sens #1 0-127 0-127 Sensitivity of the enhancer
2 Mix #2 0-127 0-127
Level of the overtones generated
by the enhancer
3 Low Gain 0-30 -15 - +15 dB Gain of the low range
4 High Gain 0-30 -15 - +15 dB Gain of the high range
5 Level 0-127 0-127 Output Level