Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 91)

91
Section 5. Using MP3 player
Section 5
The “repeat” function lets you play back a
specified region repeatedly.
fig.01-570
1. Press [MP3/TRAINER].
Switches to MP3 mode; the display will
indicate (the MP3 screen).
2. Use CURSOR [ ][ ] to move the
cursor to the file number, and use VALUE
[-][+] to select the number of the MP3/
WAV file you want to play.
3. Press [A B] at the point where you
want to begin repeating (point A).
Register the starting point (A) of the region
you want to repeat.
will blink, and that location will be
registered as the starting point (A) of the
repeated region.
4. Press [A B] at the point where you
want to stop repeating (point B).
The MP3 screen will appear. That location
will be registered as the ending point (B) of
the repeated region, and
and will
lit.
fig.****
5. Press .
The file begins playing.
6. If you want to cancel the repeat, press
[A
B] once again.
The repeat settings will be cancelled, and the
and will be lit.
Playing back repeatedly
(Repeat)
Repeat
Repeat start point (A) Repeat end point (B)
Time
• When specifying the repeat end point (B),
pressing [A B] at a point that is earlier
than the repeat start point (A) will cause that
point to be reassigned as the repeat start
point (A).
• There must be at least one second between
the repeat start point (A) and end point (B).
You can’t specify an end point that’s less
than one second away from the start point.
MICRO-BR_e1.book 91 ページ ２００６年８月１日 火曜日 午後１２時６分