Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 108)

108
Section 7. Other Convenient Functions
Here's how track data recorded on a track can be
converted to an audio file (MP3/WAV formats).
1. Make sure that you're in normal mode (p.
42), and press [UTILITY].
If you're in MP3 mode, press [MP3/
TRAINER] to switch to Normal mode, and
then press [UTILITY].
2. Press [TR2] (TRK).
3. Press CURSOR [ ].
4. Press [TR1] (IMP).
5. Use CURSOR [ ][ ] and VALUE [-]
[+] to select the audio file you want to
convert to track data.
fig.06-020
About the file name
Files created using the Track Export
procedure are named as follows.
(Ex.)
T1_V1_01.MP3
T34V8_99.WAV
The file name will be the source track and
V-track number plus a sequential number
and the extension .MP3 (or .WAV).
If an identically named file already exists,
the display will ask “Overwrite?”
Converting audio files to
track data (Track Import)
Wave data in the following formats can be
imported. You cannot import wave data in
other formats.
WAV format
• Mono or Stereo
• 8-bit or 16-bit
• Sampling Rate: 44.1 kHz
• Linear format
MP3 format
• Bit rate: 64, 96, 128, 160, 192, 224, 256, 320
kbps or VBR
• Sampling Rate: 44.1 kHz
• Add the extension “MP3” to imported MP3
files and the extension “WAV” to imported
WAV files.
• Extremely short waveform data (less than
approximately 1 sec) cannot be loaded.
MICRO-BR_e1.book 108 ページ ２００６年８月１日 火曜日 午後１２時６分