Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 54)

54
Section 2. Editing
1. Specify the units for the edit region.
fig.Disp-TrEdit-function.eps
fig.Disp-TrEdit-time.eps
fig.Disp-TrEdit-meas.eps
2. Specify the starting time/measure (Start)
of the edit region, and press [TR4]
(NEXT).
fig.Disp-TrEdit-timeST.eps
fig.Disp-TrEdit-measST.eps
3. Specify the ending time/measure (End) of
the edit region, and press [TR4] (NEXT).
fig.Disp-TrEdit-timeEn.eps
fig.Disp-TrEdit-measEn.eps
4. If you’re copying or moving data, specify
the time/measure of the copy/move
destination (To), and press [TR4] (NEXT).
fig.Disp-TrEdit-timeTo.eps
fig.Disp-TrEdit-measTo.eps
5. Use the Repeat parameter to specify the
number of times that the specified region
will be copied.
The edit region and the
number of copies
Button Edit region
[TR1] (TIM) The edit region will be specified in
terms of time. The time setting
screen appears.
[TR2] (MEA) The edit region will be specified in
terms of measures. The measure
setting screen appears.
[TR3] (ALL) The edit region will be the entire
track you specified.
[TR4] (AB) The edit region will be the region
between the points A and B you
specified.
(Start)
(End)
(To)
(Repeat)
hour
minutes
second
Sub frame
Frame
If you press [TR1] (TIM)
If you press [TR2] (MEA)
(Start)
(End)
(To)
(Repeat) Measure
Beat
If you pressed [TR3] (ALL) or [TR4] (AB)
during the copy or move procedure,
proceed to step 4 of the explanation.
MICRO-BR_e1.book 54 ページ ２００６年８月１日 火曜日 午後１２時６分