Roland BOSS DIGITAL RECORDER MICRO BR - Manual (Page 55)

55
Section 2. Editing
Section 2
fig.Disp-TrEdit-repeat.eps
* If you’re moving data, skip step 5.
* If you’re erasing data, skip steps 4–5.
6. Press [TR4] (EXE).
* The edited content is preserved when you return from
the track edit screen to the play screen.
This operation moves the data of the specified
region (or the entire track) to another location.
* Following this operation, the original location of the
moved data will be empty (containing no data).
Example 1: Moving within the same track
fig.02-340
Example 2: Moving to a different track
fig.02-350
1. Press [UTILITY].
2. Press [TR2] (TRK).
The TRACK EDIT screen appears.
fig.Disp-TRACK-EDIT.eps
3. Press [TR2] (MOV).
The track setting screen appears. Specify the
source and destination tracks for the Move
operation.
fig.Disp-Move-TR1-V1.eps
You can also specify the time by using
or to move, or by setting it
with + (time 00:00:00) or
+ (end of song).
• The parameters you need to set will depend
on the type of track edit operation you select
and on the edit region you specify. (You’ll
need to set the parameters marked by
✔.)
* If you want to copy/move/erase the AB region,
you must set point A and point B beforehand (p.
43).
CPY:Copy Start End To Repeat
TIM, MEA ✔ ✔ ✔ ✔
ALL ✔ ✔
AB * * ✔ ✔
MOV:Move Start End To
TIM, MEA ✔ ✔ ✔
ALL ✔
AB * * ✔
ERS:Erase Start End
TIM, MEA ✔ ✔
ALL ✔ ✔
AB * *
Moving data (Track Move)
Start or
Repeat start point (A)
End or Repeat end point (B)
To Time
To Time
Start or
Repeat start point (A)
End or Repeat end point (B)
Source (Track - V-track)
Destination (Track - V-track)
MICRO-BR_e1.book 55 ページ ２００６年８月１日 火曜日 午後１２時６分