Figure 13 guided setup – add device – Raritan Computer CC-SG User Manual
Page 31

C
HAPTER
3:
C
ONFIGURING
CC-SG
WITH
G
UIDED
S
ETUP
17
9. In the table of discovered devices, select the device you want to add to CC-SG, and then click
Add. The Add Device panel opens. The Add Device panel is slightly different depending on
the type of device you are adding.
Figure 13 Guided Setup – Add Device
10. You can change the Device name and Description by typing new information in the
corresponding fields.
11. Confirm that the IP address you assigned when you prepared the device to be added to CC-
SG displays in the Device IP or Hostname field, or type the correct address in the field if
necessary.
12. The TCP Port Number field will be populated automatically based on the device type.
13. Type the Username and Password you created when you prepared the device to be added to
CC-SG in the corresponding fields.
14. In the Heartbeat timeout field, type the number of seconds that should elapse before timeout
between the device and CC-SG.
15. If you are adding a Dominion SX device, check the Local access: Allowed checkbox if you
want to allow local access to the device. Clear the Local access: Allowed checkbox if you do
not want to allow local access to the device.
16. If you are manually adding a PowerStrip device, click the Number of ports drop-down arrow
and select the number of outlets the PowerStrip contains.
17. If you are adding an IPMI Server, type an Interval that is used to check for availability, and
an Authentication Method, which needs to match what has been configured on the IPMI
Server, in the corresponding fields.
18. If you want to configure all available ports on the device, check the Configure all ports
checkbox. CC-SG will add all ports on the device to CC-SG and create a node for each port.
19. In the Device Associations section at the bottom of the panel, click the drop-down arrow in
the Element column that corresponds to each Category you want to assign to the device, and
then select the element you want to associate with the device from the list.