Raritan Computer CC-SG - Manual (Page 167)

C HAPTER 12: A DVANCED A DMINISTRATION 153
8. If you chose Active/Active mode, follow steps 5 through 7 to configure the second network
interface.
9. Click Update Configuration to update the Network Setup of your system.
10. Click Close to close the Configuration Manager screen.
Log Configuration
From the Logs tab you can configure CC-SG to report to external logging servers. You can
configure what level of messages is reported in each of the logs.
Configuring Logging Activity:
1. On the Administration menu, click Configuration. The Configuration Manager screen
appears.
2. Click the Logs tab.
Figure 154 Configuration Manager Logs Screen
3. To assign an external log server for CC-SG to use, type the IP address into the Server
Address field under Primary Server.
4. Click the Level to Forward drop-down arrow and select an event severity level. All events
of this level or higher will be sent to the logging server.
5. To configure a second external log server, repeat steps 3 and 4 for the fields under Secondary
Server.
6. Under CommandCenter Log, click the Level to Forward drop-down menu and select a
severity level. All events of this level or higher will be reported in CC-SG’s own internal log.
7. When you are done configuring logs, click Update Configuration to save the settings to CC-
SG.
8. Click Close to close the Configuration Manager screen.