Raritan Computer CC-SG - Manual (Page 147)

C HAPTER 10: G ENERATING R EPORTS 133
Query Port Report
The Query Port Report displays all ports according to port status.
1. On the Reports menu, click Ports, and then click Query Port. The Query Port screen
appears.
Figure 131 Query Port Screen
2. In the Select port status section, check the checkboxes that correspond to the port statuses
you want to include in the report. Checking more than one checkbox and clicking Apply will
display ports with all statuses that are selected.
P ORT S TATUS D EFINITION
All All port statuses.
New Port is available (physical connection to target server is in
place), but the port has not been configured.
Unused Port is unavailable (physical connection to target server is not
in place) and the port has not been configured.
Available Port has been configured and connection to port is possible.
Unavailable Connection to port is not possible since the device is down and
unavailable.
Busy A user is connected to this port.
3. Check the Show Ghosted Ports checkbox in conjunction with one or more port statuses to
display ports that have the selected port status in addition to being ghosted. A ghosted port
can occur when a CIM or target server is removed from a Paragon system or powered off
(manually or accidentally). Refer to Raritan’s Paragon II User Manual for additional
information.