Roland XP-30 - Manual (Page 155)

155
Parameter List
Appendices
12: TREMOLO-CHORUS (p. 97)
Parameter Value
Pre Dly Pre delay time 0.0–100.0 ms
ChoRate Chorus rate 0.05–10.00 Hz
Cho Dpt Chorus depth 0–127
Phase Tremolo phase 0–180 degree
TrmRate Tremolo rate 0.05–10.00 Hz
Trm Sep Tremolo separation 0–127
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
13: SPACE-D (p. 97)
Parameter Value
Pre Dly Pre delay time 0.0–100.0 ms
Rate Rate 0.05–10.00 Hz
Depth Depth 0–127
Phase Phase 0–180 degree
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
14: STEREO-CHORUS (p. 97)
Parameter Value
Pre Dly Pre delay time 0.0–100.0 ms
Rate Rate 0.05–10.00 Hz
Depth Depth 0–127
Phase Phase 0–180 degree
Filter Type Filter type OFF, LPF, HPF
Cutoff Cutoff frequency 200–8000 Hz (*1)
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
*1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz
15: STEREO-FLANGER (p. 98)
Parameter Value
Pre Dly Pre delay time 0.0–100.0 ms
Rate Rate 0.05–10.00 Hz
Depth Depth 0–127
Fbk Feedback level -98–+98%
Phase Phase 0–180 degree
Filter Type Filter type OFF, LPF, HPF
Cutoff Cutoff frequency 200–8000 Hz (*1)
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
*1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz
16: STEP-FLANGER (p. 98)
Parameter Value
Pre Dly Pre delay time 0.0–100.0 ms
Rate Rate 0.05–10.00 Hz
Depth Depth 0–127
Fbk Feedback level -98–+98%
Phase Phase 0–180 degree
Step Rate Step rate 0.10–20.00 Hz, note
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
17: STEREO-DELAY (p. 99)
Parameter Value
Delay L Delay time left 0.0–500.0 ms
Delay R Delay time right 0.0–500.0 ms
Fbk Feedback level -98–+98%
Mode Feedback mode NORMAL, CROSS
Phase L Feedback phase left NORMAL, INVERT
Phase R Feedback phase right NORMAL, INVERT
HF Damp HF damp 200–8000 Hz,
BYPASS (*1)
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
*1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz, BYPASS
18: MODULATION-DELAY (p. 99)
* ParameterValue
Delay L Delay time left 0.0–500.0 ms
Delay R Delay time right 0.0–500.0 ms
Fbk Feedback level -98–+98%
Mode Feedback mode NORMAL, CROSS
Rate Rate 0.05–10.00 Hz
Depth Depth 0–127
Phase Phase 0–180 degree
HF Damp HF damp 200–8000 Hz,
BYPASS (*1)
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
*1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz, BYPASS
19: TRIPLE-TAP-DELAY (p. 100)
Parameter Value
Delay C Delay time center 200–1000 ms, note
Delay L Delay time left 200–1000 ms, note
Delay R Delay time right 200–1000 ms, note
Fbk Feedback level -98–+98%
Level C Center level 0–127
Level L Left level 0–127
Level R Right level 0–127
HF Damp HF damp 200–8000 Hz,
BYPASS (*1)
LowGain Low gain -15–+15 dB
Hi Gain High gain -15–+15 dB
Balance Effect balance D100:0W–D0:100W
Level Output level 0–127
*1: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000 Hz, BYPASS