Ricoh MIB-II - Manual (Page 91)

Operating Instructions Administrator Reference
91
B In the [ Class of new object ] box, click "Print Server", and then click [ OK ] . When you are
using NetWare 5, click "Print Sever (Non NDPS)".
C In the [ Print Server name ] box, type the name of the print server.
Important
❒ Use the same name as that specified using the NIB Setup Tool. (Step F - A ).
D Click [ Define additional properties ] to check a box, and click [ Create ] .
MMMM
Assign the printer to the created print server as follows:
A Click
[ Assignments ] , and then click [ Add ] in the [ Assignments ] group.
B In the [ Available objects ] box, click the queue created in the step K , and then click [ OK ] .
C In the [ Printers ] group, click the printer assigned in step B B B B , and then click [ Printer Number ] .
D Type the printer number, and then click [ OK ] .
Important
❒ Use the same number as that specified as Remote Printer No. using the NIB Setup Tool.
(Step
F - E ).
E After confirming the settings, click [ OK ] .
NNNN
Start the print server by typing the following from the console of the NetWare Server.
If it is running, restart it after exiting it.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
CAREE: load pserver print_server_name