Ricoh MIB-II - Manual (Page 54)

Operating Instructions Administrator Reference
54
CCCC
Click the [ Services ] tab, and confirm that "Microsoft TCP/IP Printing" is installed.
If "Microsoft TCP/IP Printing" is not installed, click [ Add ] under the [ Services ] tab, and install it.
For more information about installing and configuring network services, see Windows NT Help.
Configuring NetBEUI for Printing
Follow these instructions to configure the Network Interface Board and Windows NT to use the Net-
BEUI protocol.
Preparation
To use NetBEUI, use the SmartNetMonitor for Client port.
Configuring the printer
Configure the printer to use the NetBEUI protocol.
• Confirm that the NetBEUI protocol is set to be active. (The factory default is active.)
Reference
For more information about how to make the above settings, see "Windows NT 4.0 Configuration"
in Printer Client Reference that comes with this printer.