Ricoh MIB-II - Manual (Page 223)

Operating Instructions Administrator Reference
223
IEEE 802.11b mode This is the IEEE 802.11b transmission mode.
• IEEE 802.11b [ infrastructure ] mode : in infrastructure
mode
• IEEE 802.11b [ 802.11 ad hoc ] mode : in 802.11 adhoc
mode
• IEEE 802.11b [ ad hoc ] mode : in adhoc mode
IEEE 802.11b Tx Rate The IEEE 802.11b transmitting speed (set speed) is dis-
played.
(Example: Current Tx Rate is 11Mbps.)
IEEE 802.11b Tx Rate 11Mbps
inetd start. An inetd has started.
started with IP: has been set for and face> started.
: Subnet overlap. Subnet from Netmask and the IP address you tried to set
for overlap the subnet for another interface.
Set Subnet so that it does not overlap with another inter-
face.
IPP cancel-job: permission denied. The printer could not authenticate the name of the user at-
tempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
IPP job canceled. jobid=%d. The spooled job has been canceled due to an error or by
user request.
Message Description and Solutions