Ricoh MIB-II - Manual (Page 208)

Operating Instructions Administrator Reference
208
Printer configuration
You can check the printer configuration using telnet.
❖ ❖ ❖ ❖ telnet
Use the info command.
Note
❒ "*" (asterisk) is displayed with the current setting.
❒ Regarding *1 - *5, see the following table.
Warming Up... The printer is warming up.
Waste Toner is Almost Full The waste toner is full.
Item Description
Input Tray
No.
Name
PaperSize
Status
ID number of the paper tray
Name of the paper tray *1
Paper size loaded in the paper tray *2
Current status of the paper tray *3
Output Tray
No.
Name
Status
ID number of the output tray
Name of the output tray *4
Current status of the output tray *5
Messages Description