Ricoh MIB-II - Manual (Page 139)

Operating Instructions Administrator Reference
139
ROM Update This menu is not currently used.
4C.Graphic Mode This setting adjusts how much each color of toner overlaps when printing. If
characters or lines are blurred, selecting
[ Text Priority ] may make them clearer.
Select [ Photo Priority ] for normal use.
Note
❒ Default:Photo Priority
WL.LAN Signal You can check the signal strength when using the wireless LAN.
Reference
For more information about displaying the signal strength. See
p.144 “Displaying the Signal Strength” .
WL.LAN Defaults You can reset the wireless LAN settings to the default.
Print Area You can extend the printable area by about 2.5 mm (0.01 inch).
• Normal
• Enlarge Area
Note
❒ Default:Normal
Key Repeat The default setting [ On ] enables the user to scroll through menu items and set-
tings by holding the key down continuously, the [ Off ] setting requires the user to
press the key for each Cursor/Scroll movement.
Menu Description