Ricoh MIB-II - Manual (Page 64)

Operating Instructions Administrator Reference
64
B Click the printer you want to use, and then click [ OK ] .
Note
❒ Printers that respond to a broadcast from the computer will be displayed. To print to a
printer not listed here, click [
Specify Address ], and then type the NetBEUI address. Confirm
the NetBEUI address on the network is on the configuration page. For more information
about printing the configuration page, see
p.130 “Printing a Configuration Page” . NetBEUI
address appears as “\\RNPxxxx\xxx” on the configuration page. Type the printer's network
path name in the form of "%%Computer name\Share name". Do not type "\\" as head char-
acters but "%%".
❒ You cannot print to printers beyond routers.
❖ ❖ ❖ ❖ IPP
A Click [ IPP ] .
The IPP setting dialog box appears.
B To specify the IP address of the printer, type "http://printer's-ip-address/ printer" or
"ipp://printer's-ip-address/printer" in the
[ Printer URL ] field.
(Example IP address is 192.168.15.16)
http://192.168.15.16/printer
ipp://192.168.15.16/printer
C As necessary, type the names to distinguish the printer in [ IPP Port Name ] . Type a different
name from those of any existing port name.
If you omit this, the address typed in
[ Printer URL ] will be set as the IPP port name.
D If a proxy server and IPP user name are used, click [ Detailed Settings ] and configure the
necessary settings.
Note
❒ For more information about these settings, see SmartNetMonitor for Client Help.
E Click [ OK ] .