Ricoh MIB-II - Manual (Page 180)

180
Operating Instructions Administrator Reference
9. Appendix
SNMP
The Network Interface Board functions as a SNMP (Simple Network Management Protocol) agent us-
ing the UDP and IPX protocols. Using the SNMP manager, you can get information about the printer.
The factory default community names are "public" and "admin". You can get MIB information using
these community names.
Reference
You can configure SNMP from the command line using telnet. See p.191 “SNMP” .
You can configure SNMP from SmartNetMonitor for Admin using the NIB Setup Tool. See Help for
SmartNetMonitor for Admin.
You can configure SNMP from your Web browser. See Help on the CD-ROM.
Limitation
❒ The optional 1394 Interface Unit supports TCP/IP only.
❒ The kinds of supported MIBs differ depending on the printer.
❖ ❖ ❖ ❖ Supported MIBs
• MIB-II
• PrinterMIB
• HostResourceMIB
• RicohPrivateMIB