beautypg.com

Netware 4.x, 5 - advanced settings, Operating instructions administrator reference – Ricoh MIB-II User Manual

Page 83

background image

Operating Instructions

Administrator Reference

83

NetWare 4.x, 5 - Advanced Settings

The actual procedures for configuring the printer differ depending on whether the Network Interface
Board is configured as a print server or as a remote printer. This section describes how to configure it
in the NetWare 4.x, 5 environment.

To use NetWare 5

If you use Pure IP, use the printer as a print server. You cannot use the printer as a remote printer
when you use Pure IP.

If you use Pure IP, configure the printer to use the TCP/IP protocol. For more information about
how to make the settings, see

p.71 “Configuring the NetWare Protocol using the Control Panel”

.