Roland HPi-5 - Manual (Page 51)

51
If this Message Appears on Screen
Indication Meaning
PU
When a song with a pickup (a song
that does not start on the first beat)
is played back, the measure num-
bers will be indicated in the display
as PU, 1, 2, and so forth.
00:
This data cannot be saved in
SMF format. You cannot
save on this floppy.
To protect the copyright, this music
file cannot be saved as an SMF.
Also, the music file can not be
saved. If you want to save it, please
save on the same floppy disk.
01:
You cannot save this data.
You can only read the music file. It
can not be saved on a floppy disk.
02:
Write protected.
The protect tab on the floppy disk
is set to the Protect position (p. 6).
Change it to the Write position.
Repeat the procedure.
03:
This is a master disk.
This floppy disk cannot store the
format or save any data.
Insert a different disk and repeat
the procedure.
04:
Can’t save to this disk.
The data cannot be saved onto this
floppy disk because the format is
different. Use the floppy disk in the
same format.
05:
You can’t overwrite this file.
A new song cannot be written on
this song. Select a different song
number or use a different floppy
disk, and repeat the procedure.
10:
No disk.
No floppy disk is connected to the
disk drive. Insert the disk correctly,
and repeat the procedure.
11:
Disk or memory full.
There is not sufficient space left on
the floppy disk for the data to be
saved. Save the data onto a differ-
ent floppy disk.
12:
Disk is not formatted.
The floppy disk inserted into the
disk drive can’t be read. Be sure
you’re using Roland SMF Music
Files or other music files compati-
ble with Roland digital pianos (p.
60). Also, if you want to save your
work on floppy disk, you need to
format the floppy disk first (p. 36).
13:
Disk ejected while it was be-
ing accessed.
The floppy disk was removed from
the disk drive while reading or
writing was in progress. Insert the
floppy disk and repeat the proce-
dure.
14:
Corrupt sector found on disk
or in memory.
This floppy disk is damaged and
cannot be used. Insert a different
disk and repeat the procedure.
15:
Can’t read this data.
Be sure you’re using Roland SMF
Music Files or other music files
compatible with Roland digital pi-
anos (p. 60).
16:
Playback is aborted.
The HPi-5 cannot read the floppy
disk quickly enough. Press the [
(Stop)] button, then press the
[ (Reset)] button and [ (Play)]
button to play the song.
30:
Can’t do this function. Mem-
ory full.
Save the song on a floppy disk (p.
37) to delete the song data stored
on the HPi-5 memory.
40:
Buffer full.
The HPi-5 cannot deal with the ex-
cessive MIDI data sent from the ex-
ternal MIDI device. Reduce the
amount of MIDI data sent to the
HPi-5.
41:
MIDI cable disconnected.
A MIDI cable has been disconnect-
ed. Connect it properly and secure-
ly.
42:
Can’t record.
An excessive amount of perfor-
mance data has been sent to HPi-5
in one time and therefore could not
be recorded.
51:
Memory error.
There is something wrong with the
system. Repeat the procedure from
the beginning. If it is not solved af-
ter you have tried several times,
contact the Roland service center.
Indication Meaning
HPi-5_e.book 51 ページ ２００４年１２月２１日 火曜日 午後１２時４６分