Saving to a floppy disk – Roland HPi-5 User Manual
Page 37
37
Saving Your Performance
1
Insert the floppy disk into the disk drive.
2
Press the [Function] button, and select “Disk” in the screen, and press the [
] button.
3
Use the [
][
] buttons to select “Format,” and press the [
] button.
fig.format.e
*
Do not remove the floppy disk from the disk drive until formatting is complete.
Saving to a floppy disk
1
Insert the floppy disk into the disk drive.
2
Press the [Function] button, and select “Disk” in the screen, and press the [
] button.
3
Use the [
][
] buttons to select “Save,” and press the [
] button.
fig.disksave1.e
4
Select the format in which to save.
*
Songs can be saved in only one format on a single floppy disk. To protect the rights of the copyright owner, songs
that were recorded using commercially available music files cannot be saved in SMF format.
Value
Explanation
i-format
The song will be saved in i-format. A song saved in i-format can be listened to on Roland dig-
ital pianos (such as those from the HP-G/R and KR series), and on units from the MT series.
SMF
The song will be saved in SMF (Standard MIDI File) format. A song saved in SMF format can
be played on the many devices that are able to play back SMF music files (
→
Finalize a choice
Return to the
previous screen
Select a choice
The selected item will
be highlighted in
white.
Proceed to the
next screen
Return to the
previous screen
Change the setting
HPi-5_e.book 37 ページ ２００４年１２月２１日 火曜日 午後１２時４６分