beautypg.com

Roland HPi-5 User Manual

Page 32

background image

32

Recording Your Performance

fig.songslct.j.eps_60

2

Select “0: New Song.”

If the display does not indicate “New Song”

When you press a cursor button in the song select screen, the display will ask “Delete the selected song.
OK?” (

p. 17). When you delete the song, the “0: New Song” is displayed.

The score screen will appear when you press the [

] button several times.

3

Press the [

(Rec)] button.

The indicators of all Track buttons will blink, and the HPi-5 enters recording-standby mode.

*

If the display indicates “Record a new song/Record over selected song,” select “Record a new song.” In this case,
steps 1–2 will be omitted.

*

Be aware that if you select “Record a new song,” the currently selected song will disappear.

Select the tone that will be recorded

4

Use the [Tone] buttons to select the tone that you want to use for recording.

After selecting the Tone, press the [

] button to display the Score screen.

5

Use the [Tempo] buttons to set the recording tempo.

If you want to change the time signature (beat) of the song, press the [Metronome] button and make
settings in the Metronome screen.
After setting the tempo, press the [

] button to display the Score screen.

*

You can use the metronome while recording. In this case, the metronome sound will not be recorded.

Start recording

6

Press the [

(Play)] button.

After a two-measure count, recording will begin.
Note that recording will also begin as soon as you play anything on the keyboard, even if you do not
press the [

(Play)] button. In this case, no count will be heard.

Once recording begins, the [

(Play)] button and [

(Rec)] button indicators will light.

Go ahead and perform on the keyboard.

Stop recording

7

Press the [

(Stop)] button.

The recorded performance will be recorded on the [1/User] button.

Play back the recorded performance

8

Press the [

(Reset)] button, and then press the [

(Play)] button.

You will hear the recorded performance.
To stop the playback, press the [

(Stop)] button.

0:New Song
Select this when
recording a new
song.

Specify your response
to the message

Return to the
previous screen

Select "0:New Song"

HPi-5_e.book 32 ページ 2004年12月21日 火曜日 午後12時46分