Roland AT 5 - Manual (Page 70)

70
Display Messages
fig.E.00
Meanings:
• To protect the copyright, this music file cannot be saved as
SMF format.
• When you want to save as Atelier format, you can save on
a floppy disk.
fig.E.01
Meanings:
• You can only play the music data. It cannot be saved on a
floppy disk or internal memory.
fig.E.02
Meanings:
• The protect tab on the floppy disk is set to the Protect
position. Change it to the Write position and repeat the
procedure.
fig.E.03
Meanings:
• This floppy disk cannot store the format or save any data.
Insert a different floppy disk and repeat the procedure.
fig.E.05
Meanings:
• You cannot save data by overwriting the song on the
floppy disk.
fig.E.10
Meanings:
• No floppy disk is inserted to the disk drive. Insert the
floppy disk correctly, and repeat the procedure.
fig.E.11
Meanings:
• There is not sufficient space left on the floppy disk for the
data to be saved. Prepare another floppy disk that has
been formatted on this instrument.
fig.E.12
Meanings:
• The floppy disk inserted into the disk drive cannot be
read. Please format the floppy disk.
fig.E.13
Meanings:
• The floppy disk was removed from the disk drive while
loading or writing was in progress. Insert a floppy disk
and repeat the procedure.
fig.E.14
Meanings:
• This floppy disk is damaged and cannot be used. Insert a
different floppy disk and repeat the procedure.
fig.E.15
Meanings:
• This song cannot be read.
fig.E.16
Meanings:
• It cannot be read the floppy disk quickly enough. Press
the [Reset] button, then press the [Play/Stop] button to
play the song.