Roland AT 5 - Manual (Page 57)

57
Settings for the Composer
Adjusting the Metronome
Volume
You can adjust the volume of the metronome.
1. Press the [Utility] button.
2. Using the Menu [ ] and [ ] buttons, select
“Metronome.”
3. Press the [Rec] button.
4. Using the Menu [ ] and [ ] buttons, select
“Metronome Vol.” (Metronome Volume).
fig.09-03
5. Press the Value [-] and [+] buttons to select the
desired volume level (1–10).
Increasing the value will raise the volume of the metro-
nome.
To return to the basic screen, press the [Utility] button.
Changing the Sound of the
Metronome
You can choose one of 4 different sounds for the metronome.
1. Press the [Utility] button.
2. Using the Menu [ ] and [ ] buttons, select
“Metronome.”
3. Press the [Rec] button.
4. Press the Menu [ ] and [ ] buttons to select
“Metronome Sound.”
fig.09-04
5. Press the Value [-] and [+] buttons to select the
type of sound for the metronome.
To return to the basic screen, press the [Utility] button.
➔
This setting remains stored in memory even while power is
turned off.
Setting Descriptions
CLICK&BELL Conventional metronome sound
ELECTRONIC Electronic metronome sound
VOICE ENG. Human voice (English)
VOICE JPN. Human voice (Japanese)