Roland AT 5 - Manual (Page 52)

52
Record and Playback Your Performance
4.
Press the [Save] button to save the performance.
While performance data is being saved to the floppy disk, the following
display appears.
fig.08-22
❍
If the following screen will appear
If the floppy disk already contains performance data of the same name, the
following display will appear.
fig.08-23
● If you wish to update the contents of the performance data
1.
Press the [Rec] button.
● If you wish to save the data without erasing the performance
data already on floppy disk you must rename the song
1.
Press the [Reset] button to cancel saving.
2.
Change the name (p. 50), and perform the Save procedure
once again.
NOTE
Music data that was saved
in Atelier format cannot be
played back correctly on
instruments other than the
Atelier series.
NOTE
Saving performance data in
SMF format (SMF) requires
a longer time than saving it
in Atelier format
(ORIGINAL).