Roland AT 5 - Manual (Page 24)

24
Selecting and Playing Sounds
Adjust the Volume Balance
The AT-5 allows you to adjust the volume balance individually for each
Part.
fig.02-13
The following buttons are used to adjust the volume of a multiple number
of Parts.
Accomp/SMF [
▲] [▼] buttons:
• Automatic Accompaniment
• Playback of performance data from something other than the Atelier
(EX.: SMF music files)
1.
The volume levels of each part are adjusted using the
corresponding [
▲] and [▼] buttons.
When you press the up button (
▲), the volume increases; when you press
the down button (
▼), the volume decreases.
The volume can be set to any value from 0 to 12.
When you press the Level [
▲] [▼] buttons, the volume for each part will be
shown in the display.
fig.02-14
NOTE
When the volume value
shown in the display is 0,
that part will produce no
sound.