Roland AT 5 - Manual (Page 53)

53
Record and Playback Your Performance
Deleting Performance Songs Stored on
Disk
Follow the steps below to erase a performance song that was saved onto a
floppy disk.
1.
Insert the floppy disk containing performance songs into the
disk drive.
2.
Press the [Utility] button.
3.
Press the Menu [ ] and [ ] buttons to select “Disk
Utility.”
fig.08-13
4.
Press the [Rec] button.
5.
Press the Menu [ ] and [ ] buttons to select “Delete
Song.”
fig.08-29
To cancel the procedure, press the [Reset] button.
6.
Press the [Rec] button.
7.
Using the Value [-] and [+] button, select the performance
song to be erased.
8.
Press the [Rec] button.
You will see the following:
fig.08-30
To cancel the procedure, press the [Reset] button.
9.
To delete the performance song, press the [Rec] button again.
When erasing is completed, the basic screen reappears.