1 upgrade via the speedtouch™ upgrade wizard, Introduction, Starting the speedtouch™ upgrade wizard – RCA 580 User Manual
Page 88: On ms windows operating systems, Upgrade via the speedtouch™ upgrade wizard
7 Support
E-DOC-CTC-20040123-0001 v3.0
86
7.2.1 Upgrade via the SpeedTouch™ Upgrade
Wizard
Introduction
The procedures described in this section are valid only in case:
•
You run a MS Windows Operating System or Mac OS X.
•
Your SpeedTouch™ and computer are properly connected:
•
Through Ethernet or USB in case you run an MS Windows OS
•
Through Ethernet in case you run Mac OS X
Note
It is not possible to upgrade your modem over a wireless connection.
•
The new system software file is of the type bant-d_XX427x.bin,
e.g. bant-d_AA427A.bin.
During the upgrade procedure in most cases configuration settings are backed up by the
wizard and restored after uploading the system software.
Starting the
SpeedTouch™ Upgrade
wizard
Depending on your Operating System, you must start the SpeedTouch™ Upgrade
wizard as follows:
On MS Windows
Operating Systems
Proceed as follows:
1
Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note
If the SpeedTouch™ CD Browser window does not appear auto-
matically, click Run on the Start menu and enter the following path:
D:\Menu.exe
where D stands for the drive letter of your CD-ROM
drive.
2
The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Note
The selected language will also be used as default language in the
SpeedTouch™ web pages. See
for more infor-
mation on how to change the web page language.
Topic
Page