RCA 580 - Manual (Page 64)

5 SpeedTouch™ Web Interface
E-DOC-CTC-20040123-0001 v3.0 62
To manually add a new station which can be done at any time.
Proceed as follows:
1 Click New.
2 The following table is shown:
3 Add an intuitive name for the wireless client.
4 Add the wireless client’s physical hardware address (MAC address).
5 Whether the wireless client is allowed (select ‘yes’) or not (select ‘no’) to
exchange data between the wireless clients and the SpeedTouch™580.
Note You can also add currently associated stations semi-automatically via
the Associated Stations table. See
Associated stations for more
information.