Registering wireless clients – RCA 580 User Manual
Page 24
2 SpeedTouch™ Local Networking Setup
E-DOC-CTC-20040123-0001 v3.0
22
Registering wireless
clients
In case New stations are allowed (via registration) is enabled, you can register
new wireless network clients as follows:
1
Push the front panel button on the SpeedTouch™ for 2 seconds or click Register
on the SpeedTouch™ Wireless web page (see
for more
information).
Clicking the Register button triggers the SpeedTouch™ to unlock the ACL for a
time frame of one minute, after which the ACL is locked again. All the new wire-
less clients successfully attempting to connect to the SpeedTouch™ (having the
correct wireless settings (Network Name and, if required, Network key)) will be
added to the table as allowed station. The SpeedTouch™ automatically saves your
current configuration at the end of the registration phase.
Note
Some WLAN clients do not automatically join a WLAN. If so, follow
the instructions for the WLAN client software to initiate the associa-
tion.
2
Successfully registered stations are associated to the SpeedTouch™580 WLAN.
Depending on your WLAN client adapter a wireless icon may become green or a
message similar to the following may appear: “Successfully joined Wireless net-
work SpeedTouch012345”.
3
After one minute the ACL is locked.
4
You can control if there are successfully registered wireless clients on the Speed-
Touch™580 ACL.
Note
The registration procedure can be repeated as many as necessary.