RCA 580 - Manual (Page 60)

5 SpeedTouch™ Web Interface
E-DOC-CTC-20040123-0001 v3.0 58
Security Select Security to:
• Choose and configure a security level:
By default all security is disabled. Select the desired security configuration
(WEP or WPA-PSK) to enhance your security level:
To enable level 1 - WEP
1 Select the entry Security Level 1 WEP which allows you to proceed with
the following window:
2 Select how you intend to enter the WEP key.
3 Enter the WEP key of your choice. In case of:
• 64-bit, Alphanumeric
The WEP key must consist of 5 alphanumeric characters.
• 64-bit, Hexadecimal
The WEP key must consist of 10 hexadecimal digits
• 128-bit, Alphanumeric
The WEP key must consist of 13 alphanumeric characters.
• 128-bit, Hexadecimal
The WEP key must consist of 26 hexadecimal digits
Note Hexadecimal values range from 0 to 9 and from A to F.
Alphanumeric values range from 0 to 9 and from A to Z.
4 Click Apply to apply the WEP encryption settings.
Note The colour of the WLAN LED will change to amber.
5 Reconfigure your wireless client(s) to use the changed settings.
6 Click Save all to save your changes to persistent memory.