RCA 580 User Manual
Page 29
3 SpeedTouch™ Configuration Setup
E-DOC-CTC-20040123-0001 v3.0
27
7
The SpeedTouch™ Setup Wizard will search for the SpeedTouch™ on the net-
work. The following window shows the detection progress:
8
The SpeedTouch™ Setup Wizard should find your SpeedTouch™ device on the
local network. This is indicated by the following window:
If more than one device is found, a list of available devices will be provided. If this
is the case, select your SpeedTouch™ device (SpeedTouch™580) and click Next.
Note
If the Setup wizard does not find any SpeedTouch™ on the network an
error
window appears. In this case check that:
•
The SpeedTouch™ is turned on and fully initialized.
•
Your PC has a valid IP address (i.e. any IP address but 0.0.0.0).
•
No dedicated firewall device or router is placed between your
PC and the SpeedTouch™.
•
No personal firewall software is running on your PC.
Note
It is possible that your PC isn’t correctly connected to the Speed-
Touch™580. In this case check that:
•
The WLAN client is correctly associated with the Speed-
Touch™580 WLAN as described in
Client Association” on page 19
•
Your USB drivers are correctly installed if you are connected
through USB.
To repeat the search for your SpeedTouch™, click Back and proceed with
step
of this procedure.
9
Click Next to start the configuration procedure as described below.