Supported systems, Prerequisites, Speedtouch™ easy setup – RCA 580 User Manual
Page 33: Oceed with
3 SpeedTouch™ Configuration Setup
E-DOC-CTC-20040123-0001 v3.0
31
3.2 Operating System Independent SpeedTouch™
Configuration Setup
Supported Systems
As the SpeedTouch™ is OS-independent, this configuration setup can be used from any
computer system.
Prerequisites
Make sure that:
•
The SpeedTouch™ device is correctly set up and turned on as described in
“1.2 Setting Up the SpeedTouch™” on page 9
•
The SpeedTouch™ device is in its default configuration state.
See
“7.3 SpeedTouch™ Default Configuration” on page 95
for resetting your
device.
•
If you want to configure the SpeedTouch™ over the wireless network, the
computer’s WLAN client is installed and correctly associated with the Speed-
Touch™ wireless network according to
“2.3.1 First-time Wireless Client Associa-
•
The computer’s Operating System supports TCP/IP and it’s Ethernet interface is
configured for obtaining its IP configuration dynamically.
Note
In case of problems with DHCP you can also configure the computer’s
Ethernet or USB interface with a static Net10 private IP address, e.g.
10.0.0.1, 10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address
as this is the default IP address of the SpeedTouch™.
•
Your web browser is able to run Javascripts.
SpeedTouch™
Easy Setup
SpeedTouch™ Easy Setup consists of two parts:
•
Configuration of the SpeedTouch™
•
(if needed)