Configuration of the speedtouch – RCA 580 User Manual
Page 34
3 SpeedTouch™ Configuration Setup
E-DOC-CTC-20040123-0001 v3.0
32
Configuration of the
SpeedTouch™
Proceed as follows:
1
Open a web browser and browse to the SpeedTouch™ web pages at
http://10.0.0.138
. See
“5 SpeedTouch™ Web Interface” on page 49
for more
information.
Note
If you can not access the SpeedTouch™ web pages, it is probably not in
its default state. It is recommended to reset the device. See
“7.3 SpeedTouch™ Default Configuration” on page 95
for more infor-
mation.
2
The embedded
wizard will appear automatically:
Click
Next
.
Note
If
doesn’t start automatically go to
Advanced > Easy Setup
.
3
The following window invites you to select the appropriate Service for your inter-
net connectivity:
In the Service list, select the Service as specified by your Service Provider and click
Next
to continue.
Note
If only one Service is available, this window will not be shown.
4
Subsequent screens will guide you through the configuration setup of the Speed-
Touch™. Follow the instructions and enter the required information whenever
needed. The requested information will depend on the selected Service profile
and should be provided by your Service Provider.
Click Next whenever requested.