Radio Shack PRO-96 - Manual (Page 90)

90
When scanning a trunked radio
system in Closed Mode, it is
possible to lock out an ID by
pressing
L/OUT while the ID is
active with a voice call.
Reviewing Locked-Out
Talkgroup IDs
You can easily review and clear
locked talkgroup IDs in the ID list.
This process is similar to finding
and clearing locked out
conventional channels, except it is
performed while in a trunked ID
list.
1. Press PGM and then TRUNK .
2. Press FUNC , and then L/OUT .
The first locked out ID in the
ID list is displayed.
3. Press L/OUT to unlock the
selected ID, or press FUNC ,
and then L/OUT again to
continue reviewing locked
IDs.
Changing from ID Text
Tag Display to ID Code
Display
By default, your scanner displays
the stored alphanumeric text tag
when receiving a trunked voice
call. You can toggle the display to
show the text tag or the talkgroup
ID code by pressing
TEXT while
the scanner is stopped on a
trunked talkgroup call.
T
RUNKED
D
ELAY
F
UNCTION
The trunking ID delay is set
separately from the channel delay
on a per channel storage bank