Radio Shack PRO-96 - Manual (Page 37)

37
1. Press PGM , and then TRUNK .
2. Press FUNC , and then
S
or
T
to select the desired bank.
3. Press FUNC , and then press
8 .
Block 0 size code. Use 15 for
type II. S-00 is displayed.
4. Enter the size code supplied
with the Type I system
information, referring to the
prompts that appear in the
display. If the information for
your Type I system is not
available, try the following
common fleet maps:
Ф
Ф
NOTES
Ô
• The default setting of
the bank is for
Motorola Type II.
However, if you set
Type I and wish to
restore Type II, enter
15 at Step 4.
• To confirm the input,
repeat Steps 1-4 and
press ENTER. Each
time you press
ENTER, you confirm
the size code. If you
find an error, press
CLR and begin again
at Step 1.
Block Size Code
1 2 3 4 5 6 7 8
0 S11 S4 S4 S12 S4 S3 S10 S1
1 S11 S4 S4 — S4 S10 S10 S1
2 S11 S4 S4 S4 S12 S4 S11 S2
3 S11 S4 S4 S4 — S4 S4 S2
4 S11 S4 S4 S4 S4 S12 S4 S3
5 S11 S4 S4 S4 S4 — S4 S3
6 S11 S4 S12 S4 S4 S12 S4 S4
7 S11 S4 — S4 S4 — S4 S4
Block Size Code
9 10 11 12 13 14 15 16
0 S4 S0 S4 S0 S3 S4 S4 S3
1 S4 S0 S0 S0 S3 S3 S4 S10
2 S0 S0 S0 S0 S11 S10 S4 S10
3 S0 S0 S0 S0 S4 S4 S11 S11
4 S0 S0 S0 S0 S4 S4 S11 S0
5 S0 S0 S0 S0 S0 S4 S0 S0