Radio Shack PRO-96 - Manual (Page 59)

59
3. Press ENTER to set the lower
limit frequency. The cursor
moves to upper frequency
field. If the entered frequency
is incorrect,
Invalid Freq briefly
appears in the scanner’s
display.
4. Enter your desired upper
frequency and press ENTER .
5. Rotate SQUELCH clockwise
and leave it set to a point just
after the rushing sound stops.
6. Press SRCH to start
searching. When the scanner
finds an active frequency, it
stops searching.
U
SING
Z
EROMATIC
You can set Zeromatic on or off by
pressing
FUNC then 0 . Press FUNC
,and then 0 again to toggle the
Zeromatic setting. When this
feature is turned on,
Zeromatic ON
briefly appears in the display, then
z appears at the first digit of the
second line. When searching with
Zeromatic on, the scanner will
automatically tune to the correct
center frequency (or the step
increment closest to the correct
center frequency). When
searching with Zeromatic off, the
scanner will unmute faster on a
detected signal but the frequency
may not be exact. If the scanner
stops on a signal before it reaches
the correct center frequency, you
can step up or down to the correct
frequency using the
S
or
T
keys.
Zeromatic functions only in search
banks 2, 3, 4, 5 and 6.