Radio Shack PRO-96 - Manual (Page 77)

77
working memory. It is not possible
to change the V-Scanner folder
name from the V-Scanner menus.
Always use
FUNC , TEXT while in
program mode to assign a V-
Scanner folder name to the
current working memory. This
name will be stored with the V-
Scanner when it is saved, and will
appear while you are performing
V-Scanner operations. If you press
TEXT while in a V-Scanner
operations menu, you will be
prompted to use
FUNC , TEXT while
in program mode to assign or
change the name of the V-
Scanner folder.
Follow these steps to perform V-
Scanner operations:
1. Press PGM
2. Press FUNC , PGM . The
scanner will display the V-
Scanner menu:
Select the option that
corresponds with the function
that you wish to execute.
3. If you want to save the
contents of the scanner’s
working memory to a V-
Scanner folder, press
1 . The
scanner will display:
Press the number key that
corresponds with the V-
Scanner folder you wish to
save the current configuration
to, or press
CLR to return to
the V-Scanner menu. Your
selected folder location and
the name of any previously
stored V-Scanner will appear
in the display. For example,
V-Scanner
1-SAVE
2-LOAD 3-DEL
CL to EXIT
Save to
V-Scanner:
ENTER if YES
CL to EXIT