Radio Shack PRO-96 - Manual (Page 61)

61
M
ANUALLY
T
UNING A
F
REQUENCY
You can manually set the scanner
to move through all receivable
frequencies, or select a specific
frequency as a starting point.
1. Press TUNE . TUNE and the
current frequency appear in
the display. The scanner
automatically begins tuning
up or down.
2. Use the number keys to enter
the frequency where you want
the scanner to start.
3. Press ENTER . After two
seconds the scanner will
automatically tune from the
entered frequency.
4. Press
S
or
T
to change the
direction of the tune. When
the scanner finds an active
frequency, it stops on the
frequency.
Ô
USING
FREQUENCY COPY
You can easily copy a frequency
into a specified channel, a vacant
channel in a specified bank, or a
priority channel. This feature
provides and easy method of
storing frequencies of interest you
encounter while searching or
tuning.
Ф
Ф
NOTES
Ô
Manually Tuning a
Frequency
If you press PAUSE
while tuning, the scanner
stops tuning and
**PAUSED**
appears in
the display. Press
PAUSE again, and the
scanner resumes tuning.
While tune mode is
paused, you can step up
or down one frequency
at a time by using the
S
or T keys.
Using Frequency
Copy
You cannot copy a
frequency from the
Marine search bands.