Radio Shack PRO-96 - Manual (Page 89)

89
Closed Mode scanning is useful in
cases where you wish to restrict
the traffic you monitor to a certain
set of talkgroups only these
talkgroups are specified in the ID
list and not locked out.
Toggling Open and Closed
Modes
To toggle Open or Closed Mode
state for a bank, press
FUNC , 5
while stopped on a channel in the
bank in SCAN, MAN or PGM
modes. The scanner will briefly
display
Bank OPEN or
Bank CLOSED to indicate the new
Open or Closed state for the bank.
Manual ID Lockout
Toggle
1. Press PGM .
2. Press T RUNK .
3. Press FUNC , and then S or T
to move to the desired bank.
4. Press
S
or
T
to select the ID
memory.
5. Press L/OUT to toggle the lock
out status of the selected ID.
A
CTIVATING
ID
L
OCKOUT
W
HILE
S
CANNING
When scanning a trunked radio
system in Open Mode, you can
lock out a trunked ID by pressing
L/OUT while the scanner is
stopped on a voice call. If the ID
has not been previously entered
into the ID list for that bank, it will
be added and locked out
automatically.