Network Technologies USBV-x - Manual (Page 7)

NTI UNIMUX SERIES USB KVM SWITCH
3
FEATURES AND FUNCTIONS
1.
CPU Status LEDs - for visual indication of connection between the user and a specific CPU.
2.
RS232 - (optional) DIP switches for configuring switch address when RS232 is used
3.
CPU Select Switches - push to manually switch to a specific CPU or change the switch operating mode
4.
Mode Status LEDs - for visual indication of switch operating mode
5.
IEC Connector - for attachment of country-specific power cord
6.
Power Switch - to power up or power down the UNIMUX
7.
RS232 -(optional) 9DB male connector- for attachment of RS232 control cable
8.
CPU x - USB type B female connector-for connection of USB device cable from CPU(s)
9.
DEVICES - USB type A female connector- for connection of user USB device(s)
10.
VIDEO-x - 15HD female connectors- for connecting video cables from CPUs
11.
MONITOR - 15HD female connector- for connection of the user video monitor
MONITOR
USB DEVICES
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5
8 4 7 3 6 2 5 1 VIDEO VIDEO
R
S
2
3
2
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aurora, OH 44202 www.nti1.com
5 6 7 8 9 10
11
Rear View of UNIMUX-USBV-8O-RS
1 8
RS232 On
Off
NTI R
Ne two rk T echno lo gie s Inc
Scan Command Broadcast
1 2 3 4
UNIMUX TM
5 6 7 8
1
2 3 4
Front View of UNIMUX-USBV-8O-RS