Network Technologies USBV-x - Manual (Page 15)

NTI UNIMUX SERIES USB KVM SWITCH
11
Mice and Trackballs with MACs
The UNIMUX can be configured to enable full functionality between mice and trackballs having two or more buttons and USB
MAC CPUs. By default, the ports on the UNIMUX are configured for use with WINDOWS and SUN CPUs and have no special
translation for using multi-function mice and trackballs when a MAC CPU is connected. Using the commands <
M > + +
(xx = port number), or < W > + + in Command Mode (page 8), either enable or disable this feature as needed for each
port.
NOTE: Be sure to reconfigure port for connection to a WINDOWS or SUN CPU if a MAC CPU is removed and a
WINDOWS or SUN CPU is then connected.