Basic operations -3, Basic operations – NISSAN 2010 Altima Coupe User Manual
Page 294
Symptom
Possible cause
Possible solution
No image is displayed.
The brightness is at the lowest setting.
Adjust the brightness of the display.
The system in the video mode.
Press DISC-AUX to change the mode. Refer to the vehicle Owner’s Manual.
The display is turned off.
Press and hold the
button to turn on the display.
No voice guidance is available.
or
The volume is too high or too low.
The volume is not set correctly, or it is turned off.
Adjust the volume of voice guidance.
Voice guidance is not provided for certain streets
(roads displayed in gray).
This is not a malfunction.
No map is displayed on the screen.
A screen other than map screen is displayed.
Press the MAP button.
The screen is too dim. The movement is slow.
The temperature in the interior of the vehicle is low.
Wait until the interior of the vehicle has warmed up.
Some pixels in the display are darker or
brighter than others.
This condition is an inherent characteristic of liquid
crystal displays.
This is not a malfunction.
Some menu items cannot be selected.
Some menu items become unavailable while the
vehicle is driven.
Park the vehicle in a safe location, and then operate the navigation system.
BASIC OPERATIONS
Troubleshooting guide
11-3