Nortel Networks Application Server 53r 5300 00 - Manual (Page 66)

66 AS 5300 software deployment
Attention: For increased security, do not store the parameters for
db.username and db.password in the installprops.txt file. If these
parameters are not specified in the installprops.txt file, the mcpInstall.pl
script prompts for them. This information is then encrypted and written to
another file that is used by all of the scripts in the /var/mcp/install directory.
For new system installations, the db.username parameters must satisfy the
following restrictions:
• is between 6 and 30 characters (inclusive) in length
• starts with a letter [a-z] [A-Z]
• only contains the characters [0-9] [a-z] [A-Z] and “_”
For new system installations, the db.password parameters must satisfy the
following restrictions:
• is between 15 and 30 characters (inclusive) in length
• starts with a letter [a-z] [A-Z]
• contains at least two digits [0-9]
• contains at least two ‘_’
• does not contain the associated DB username
• only contains the characters [0-9] [a-z] [A-Z] and “_”
AS 5300 initial software deployment
This section contains information on deploying AS 5300 software.
AS 5300 initial software deployment procedures
The following work flow shows the sequence of procedures required to
deploy AS 5300 software.
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.