Nortel Networks Application Server 53r 5300 00 - Manual (Page 48)

48 Platform software installation
Prerequisites
• You have completed the steps described in "Configuring the
networking, serial console redirection, and time zone settings" (page
45)
.
•
External time source IP address(es), if applicable.
•
Remote syslog server IP address, if applicable.
Procedure Steps
Step Action
1 During the Linux installation process, the system displays the
following prompt:
Please indicate the Clock Source function of this
server:
2 Select the clock source.
If you are... Select...
Installing an EMS1 server Option 1
Installing an EMS2 server Option 2
All other SIP core servers Option 3
3 Configure the clock source.
For more information about configuring the clock source for
EMS1 and EMS2 servers, see .
For more information about configuring the clock source for all
other SIP core servers, see .
4 The system displays the following prompt:
Do you wish to configure a Syslog Server IP Address
(Y/N) [N]?
5 Do one of the following:
Select N to not configure the syslog server IP address.
OR
Select Y to configure the syslog server IP address. If you select
this option, enter the syslog server IP address.
The system displays the following prompt:
Do you wish to enable system audit? (Y/N) [N]?
6 Do one of the following:
Select N to not enable system audit.
OR
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.