Nortel Networks Application Server 53r 5300 00 User Manual

Page 58

Platform software installation

The Date and Time is displayed.

Do one of the following:

Enter Y to accept the configuration.

Enter N to change the BIOS hardware clock.

After the configuration is accepted, the user accounts display.

Press Enter to continue.

At the Password Configuration screen, enter passwords for the
mandatory system accounts:

•

root

•

bootloader

•

ntossadm

•

nortelrps

You can refer to

"Configuring accounts and passwords" (page

51)

for more information on these steps.

The System Configuration Complete screen appears.

Attention:

For NTP configuration changes, if symmetric keys

were used, you must restore the keys to the server and execute
the ntpConfig.pl script after installation.

Press Enter to continue the installation.

The installer applies the system configurations. This may take
several minutes. When the configurations are complete, the CD
ejects and the server reboots.

The operating system and all stored configurations imported from
the backup file, such as ACL and IPSec configuration, are now
restored to the server. For information on backup and restore,
see Nortel AS 5300 Security (NN42040-601).

If applicable, apply any Linux Maintenance Release patches to
bring the system up to date with current baselines.

--End--

Application Server 5300

Nortel AS 5300 Installation

NN42040-300

01.04

4 November 2008