Prerequisites – Nortel Networks Application Server 53r 5300 00 User Manual

Page 49

Configuring the Primary (EMS1) and Secondary (EMS2) clock source servers

Select Y to enable system audit. Enabling the system audit might
impact system performance.

The system displays a validation summary of the current
configuration settings.

Do one of the following:

Type Y to confirm the configuration settings and continue with
the Linux installation process.

Type N to go back through the individual configuration steps and
make changes.

After you confirm the settings, the installation process continues.

--End--

Configuring the Primary (EMS1) and Secondary (EMS2) clock
source servers

Use this procedure to configure the primary and secondary clock source
servers.

Prerequisites

•

You selected option 1 or 2 at the Clock Source function prompt.

Procedure Steps

Step

Action

Do one of the following:

Select E to use an external clock source (recommended).

Select I to use an internal clock source (not recommended). If
this option is selected, proceed to step 4.

Enter the number of external clock sources to reference (1-10).

Enter the IP addresses of the external clock source servers.

The system displays the following prompt:

Enter the MACHINE Logical IP Address of the
Clock Source Server

If you are configuring the Primary (EMS1) server, enter the
machine logical address of the Secondary (EMS2) server.

Application Server 5300

Nortel AS 5300 Installation

NN42040-300

01.04

4 November 2008