Nortel Networks Application Server 53r 5300 00 - Manual (Page 105)

Installing the firmware upgrades 105
5 When the server reboot begins, remove the CD from the
CD-ROM drive.
--End--
Installing RSA-II card firmware upgrades
Use this procedure to upgrade the firmware of the RSA-II card. Server
reboot is not required for this upgrade.
Prerequisites
•
You must have the CD containing the RSA-II card firmware upgrade file
(Platform firmware upgrade CD).
•
A PC is required to access RSA-II web interface and load firmware.
Procedure Steps
Step Action
1 Load the Platform firmware upgrade CD into the CD-ROM drive.
2 Start a Web browser and log on to the ASM Remote Control
(RSA-II card).
3 From the navigation menu, select Tasks > Firmware Update.
4 Browse to the directory where the update file is stored.
\\x3550\RSA
5 Select the paetbrus.pkt file and click Update.
6 When the file transfer completes, click Continue.
The RSA-II card Boot ROM firmware is applied.
7 From the navigation menu, select Firmware Update.
8 Browse to the directory where the update file is stored.
\\x3550\RSA
9 Select the paetmnus.pkt file and click Update.
10 When the file transfer completes, click Continue.
The RSA-II care Main Application firmware update is applied.
11 From the navigation menu, select Restart ASM.
12 Click Restart.
13 Click OK.
--End--
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.