NEC PX-42XM4A - Manual (Page 45)

En-44
Specifications
Screen Size 36.3"(H) ן20.3"(V) inches
922(H) ן515(V) mm
diagonal 42"
Aspect Ratio 16 : 9
Resolution 1024(H) ן768(V) pixels
Pixel Pitch 0.036"(H) ן0.027"(V) inches
0.9(H) ן0.671(V) mm
Color Processing 4,096 steps, 68.7 billion colors
Signals
Synchronization Range Horizontal : 15.5 to 110.0 kHz
(automatic : step scan)
Vertical : 50.0 to 120.0 Hz
(automatic : step scan)
Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
1 , DVD* 1 , DTV* 1
Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)
RGB
Visual 1 (Analog) mini D-sub 15-pin
ן1
Visual 2 (Analog) BNC (R, G, B, HD, DV)
ן1* 2
Visual 3 (Digital) DVI-D 24-pin
ן1* 3
Video
Visual 1 BNC
ן1
Visual 2 RCA-pin
ן1
Visual 3 S-Video: DIN 4-pin
ן1
DVD/HD
Visual 1 RCA-pin (Y, Cb/Pb, Cr/Pr)
ן1* 1
Visual 2 BNC (Y, Cb/Pb, Cr/Pr)
ן1* 1, * 2
Visual 3 DVI-D 24-pin
ן1* 3
Audio Stereo RCA
ן3(Selectable)
External Control D-sub 9-pin
ן1(RS-232C)
Sound output 8W+8W at 6 ohm
Power Supply AC100-240V 50/60Hz
Current Rating 4.5A (maximum)
Power Consumption 285W (typical)
Dimensions 40.2 (W)
ן24 (H)ן3.9 (D) inches
1022 (W)
ן610 (H)ן98(D) mm
Weight 66 lbs / 30 kg (without stand)
Environmental Considerations
Operating Temperature 0°C to 40°C / 32°F to 104°F
Humidity 20 to 80% (no condensation)
Altitude 720 to 1114 hPa
(0 to 9180 feet / 0 to 2800 m)
Storage Temperature -10°C to 50°C / 14°F to 122°F
Humidity 10 to 90% (no condensation)
Altitude 700 to 1114 hPa
(0 to 9840 feet / 0 to 3000 m)
Other Features Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3
pull down Converter (NTSC, 480I, 525I, 1035I,
1080I (60Hz)), 2-2 pull down Converter (PAL,
576I, 625I, NTSC, 480I, 525I), Digital Zoom
Function (100-900% Selectable), Video Wall 4-25
multi screen, Self Diagnosis, Image Burn
reduction tools (PLE LOCK1~3, INVERSE,
WHITE, ORBITER (Auto1,2/Manual), SCREEN
WIPER), Color Temperature select (high/mid/mid
low/low, user has 4 memories), Control lock
(Except power SW), Auto Picture, Input Skip,
Color Tune, Low Tone (3 mode), Auto ID,
Programmable Timer, Gamma Correction (4
mode), Loop through interface, Plug and play
(DDC1, DDC2b, RGB3: DDC2b only),
Split screen operations
Regulations UL 60950-1, CAN/CSA-C22.2 No.60950-1-03,
FCC class B, ICES-003 class B
The features and specifications may be subject to change without
notice.
* 1 HD/DVD/DTV input signals supported on this system.
480P (60 Hz)
480I (60 Hz) 525P (60 Hz)
525I (60 Hz) 576P (50 Hz) 576I (50 Hz)
625P (50 Hz) 625I (50 Hz) 720P (60 Hz)
720P (50 Hz) 1035I (60 Hz) 1080I (50 Hz)
1080I (60 Hz) 1080P (50 Hz) 1080P (60 Hz)
* 2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input.
Select one of them under “BNC INPUT”.
* 3 Compatible with HDCP.
Supported Signals
• 640 ؂480P @ 59.94/60Hz • 1920 ؂1080I @ 50Hz
• 1280
؂720P @ 59.94/60Hz
• 720
؂576P @ 50Hz
• 1920
؂1080I @ 59.94/60Hz
• 1280
؂720P @ 50Hz
• 720
؂480P @ 59.94/60Hz
Note: In some cases a signal on the plasma monitor may not be displayed
properly. The problem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc...). If you do experience
such a problem please contact NEC Solutions (America), Inc. and also
the manufacturer of the source equipment.
Units are in inch
(mm)
3.9"
(98)
1.59"
(40.4) 2.31"
(57.6)
40.2" (1022)
24" (610)
36.3" (922)
20.3" (515)
Ⅵ 42XM4