NEC PX-42XM4A - Manual (Page 36)

En-35
Switching the input source quickly
This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On “SEAMLESS SW” of “OPTION4” menu, select “ON”.
Select “RGB1” and “RGB2”.
SEL. ADJ. RETURN
O P T I O N 4 4 / 4
P R E V I O U S PAG E
S U B . P I C T U R E
Z O O M N AV
P I C F R E E Z E
S E A M L E S S S W
S E L E C T 1
S E L E C T 2
T E X T I N S E RT
: B T M L F T
: S B Y S 1
: O N
: R G B 1
: R G B 2
: O F F
EXIT
* The available sources depend on the setting of input.
Information
Ⅵ
SEAMLESS SW Function
* This feature will not function for certain input
combinations. See the table on page En-15.
* After switching to the selected input, please operate this
function.
* This feature will not function during split screen mode.
* When SEAMLESS SW is first turned on, or when
signals being transmitted are changed, there may be a
slight delay due to signal analysis.
Ⅵ SEAMLESS SW settings
OFF: Turns off the SEAMLESS SW function.
ON: When the CLEAR/SEAMLESS SW button is
pressed, input signals will switch quickly according to
the setting of SELECT1 and SELECT2.
RGB/PC1
RGB/PC1 RGB/PC1
RGB/PC1
RGB/PC1 RGB/PC1
Side-by-Side Picture-in-Picture
SELECT/
FREEZE
button SELECT/
FREEZE
button
S BY S1
RGB/PC1 RGB/PC1
or
S BY S2
RGB/PC1 RGB/PC1
Side-by-Side Picture-in-Picture
POINTER button
or
Zoom+/- button
POINTER button
Displaying still images in the sub screen
This feature enables display in the sub screen of still images
captured by pressing the SELECT/FREEZE button.
Example: Setting “PIC FREEZE” to “BTM LFT”
On “PIC FREEZE” of “OPTION4” menu, select “BTM
LFT”.
SEL. ADJ. RETURN
O P T I O N 4 4 / 4
P R E V I O U S PAG E
S U B . P I C T U R E
Z O O M N AV
P I C F R E E Z E
S E A M L E S S S W
S E L E C T 1
S E L E C T 2
T E X T I N S E RT
: B T M L F T
: B T M L F T
: O F F
: —
: —
: O F F
EXIT
Information
Ⅵ
PIC FREEZE Function
* This feature does not function during split screen mode.
* Digital zoom is not available while this function is
operating.
* A further press of the SELECT/FREEZE button while
this function is operating will cancel this function.
* Providing a 2-screen display will cancel this function.
Ⅵ
PIC FREEZE settings
OFF: Will not show the still image.
S BY S1, 2: The still images captured by pressing the
SELECT/FREEZE button will be shown on the sub
screen of side-by-side mode.
BTM LFT~TOP LFT: The still images captured by
pressing the SELECT/FREEZE button will be shown
on the sub screen of picture-in-picture mode.
BTM LFT~TOP LFT: Will show the entire image on
the sub screen of picture-in-picture mode.