Nortel Networks Alteon Link Optimizer 150 User Manual
Page 38
38 Chapter 3 Installing and configuring Desktop Messaging
N0008714 02
6
In the E-mail address box type the subscriber’s CallPilot address in the form
For example: [email protected], where:
•
1416555 is the SMTP/VPIM prefix. If you use Message Networking, include this prefix.
•
6003 is the CallPilot mailbox number
•
voiceserver.ca.result.com is the FQDN of the CallPilot 100/150 system. If your network
does not use DNS, enter
that of the CallPilot 100/150 system)
or
if you are not using a DNS environment, instead of the FQDN type the IP address of the
CallPilot.
7
Click the Next button.
The E-Mail Server Names screen appears.
8
From the list box choose IMAP as the incoming mail server type.
9
In the Incoming mail server box type your FQDN, or if you are not using a DNS
environment, type the IP address of the CallPilot.
10 In the Outgoing mail server box type your FQDN, or if you are not using a DNS
environment, type the IP address of the CallPilot.
11 Click the Next button.
The Internet Mail Logon screen appears with the subscriber’s IMAP account name displayed.
12 In the Password box type the subscriber’s CallPilot mailbox password.
Do not select the Log on using Secure Password Authentication (SPA) check box.
13 Click the Next button.
The Internet Connection Wizard - Internet Mail Logon screen appears.
14 In the Account name box type the subscriber’s SMTP/VPIM prefix and mailbox number.
15 In the Password box type the subscriber’s mailbox password.
16 Click the Next button.
The Internet Connection Wizard - Congratulations screen appears.
17 Click the Finish button and close the Internet Accounts screen.
A message appears that asks if you want to download folders from the mail server you added.
18 Select the Yes button to download the folder list for the IMAP account that you just created
or
select the No button if you do not want to download the folder list at this time.
Tip: To make changes to your new IMAP account, select the account name and click
Properties to display the Properties page.
19 Click the OK button.