After you install desktop messaging – Nortel Networks Alteon Link Optimizer 150 User Manual
Page 30
30 Chapter 3 Installing and configuring Desktop Messaging
N0008714 02
After you install Desktop Messaging
After you install Desktop Messaging:
•
Set the default email client.
•
Configure access to Desktop Messaging on subscribers’ computers
•
Set the Timezone and Daylight Savings Time setting in CallPilot Manager
To set the default email client
1
Click the Windows Start button, point to Settings and click Control Panel.
The Control Panel window appears.
2
Double click the Internet Options icon.
The Internet Properties window appears.
3
Click the Programs tab.
4
In the E-mail list box, make sure the client that is displayed is the e-mail client you are using.
If another email client is displayed, select the correct email client from the E-mail list box and
click the OK button.
To configure access to Desktop Messaging on subscribers’
computers
On each subscriber computer:
1
Start Desktop Messaging for the first time on the client computer.|
The Desktop Messaging Logon page appears.
2
In the Server box type the IP address.
3
In the Password and Mailbox boxes, enter the subscriber’s password and mailbox numbers.
The email client opens.
To set the Timezone and Daylight Savings Time settings
1
Start CallPilot Manager. For information about logging onto CallPilot Manager, refer to the
CallPilot Manager Set Up and Operation Guide.
2
Click the Configuration heading.
3
Click the System Properties link.
The System Properties page appears.
4
Select the timezone you are in from the Timezone list box. The timezone controls the deliver
and receive settings for Desktop Messaging.
5
Select the Daylight Savings Time check box at the start of Daylight Savings Time. When
Daylight Savings Time ends, clear the check box. This setting ensures that the message times
for Desktop Messaging are correct.
6
Click the Submit button.